|
Section 1. PRODUCT AND COMPANY IDNETIFICATION |
||
|
Product Name: BathCide™ Water Bath Treatment Catalog Number: 113001 Company Identification
|
|
Section 2. COMPOSITION AND INGREDIENTS |
|
Mixture of substances in water. |
|
Section 3. HAZARDS IDENTIFICATION |
|
No known hazards with this product. |
|
Section 4. FIRST AID MEASURES |
|
Eyes: Immediately flush eyes with copious amounts of water for at least 15 minutes. Do not allow victim to rub eyes or keep eyes closed. Seek medical advice. Skin: Immediately wash skin with copious amounts of water. Seek medical advice if irritation persists. Inhalation: If inhaled, remove to fresh air. Get medical attention for any breathing difficulty. Ingestion: If swallowed, wash out mouth with water provided person is conscious. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention immediately. Other: Wash contaminated clothing before re-use. |
|
Section 5.FIRE FIGHTING MEASURES |
|
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Use extinguishing media appropriate to the surrounding fire. Substance is non-combustible. Extinguishing Media: This product is non-combustible. Use agent most appropriate to extinguish surrounding fire. Cool containers with flooding quantities of water until well after fire is out. Use water spray, dry chemical, carbon dioxide, or appropriate foam. |
|
Section 6. ACCIDENTAL RELEASE MEASURES |
|
General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as saw dust. Ventilate area and wash spill site after material pickup is complete. |
|
Section 7. HANDLING AND STORAGE |
|
Handling: Wash thoroughly after handling. Wash hands before eating. Use with adequate ventilation. Storage: Keep container tightly closed and store at room temperature when not in use. |
|
Section 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION |
|
Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Personal Protective Equipment: Gloves, protective clothing or eyewear are recommended in accordance with all applicable state and local regulations. |
|
Section 9. PHYSICAL AND CHEMICAL PROPERTIES |
|
|
Physical State: liquid Appearance: colorless solution pH: 7.0 |
Solubility: Water Boiling point: 100°C Freezing Point: 0°C |
|
Section 10. DISPOSAL CONSIDERATION |
|
Dispose of in a manner consistent with federal, state, and local regulations. Contact a licensed professional waste disposal service to dispose of this material. |
|
Section 11. TOXICOLOGICAL INFORMATION |
|
Toxic Effects on Humans: Slightly hazardous in case of eye contact, ingestion, or inhalation. Chronic Effects on Humans: Data not available. Other Toxic Effects on Humans: Data not available. |
|
Section 12. STABILITY AND REACTIVITY |
|
|
Chemical Stability: Stable at room temperature in closed containers under normal storage and handling conditions. |
Hazardous Decomposition Products: Unknown. Hazardous Polymerization: Not known to occur. Incompatibilities with Other Materials: Unknown. |
|
Section 13. ECOLOGICAL INFORMATION |
|
Data not available. |
|
Section 14. TRANSPORT INFORMATION |
|
Contact Antibody Research Corporation about shipping method of this product. |
|
Section 15. REGULATORY INFORMATION |
|
None of the chemicals in this product are listed as Toxic Pollutants under the CWA. None of the chemicals in this product are considered highly hazardous by OSHA |
|
Section 16. OTHER INFORMATION |
|
Antibody Research Corporation believes the above information to be accurate, but not necessarily all inclusive, and represents the best information currently available to us. This information should only be used as a guide in the handling and use of this material. The data in this MSDS relates only to the specific material designated herein and does not relate to use in combination with any other material or in any process. Antibody Research Corporation shall not take responsibility for any damage resulting from handling or from contact with the above product. The information in this material safety data sheet meets the requirements of the United States Occupational Safety and Health Act and regulations promulgated there under 29 CFR § 1910.1200. |